Spraytex is easy to use, but with a little bit of practice, you’ll be sure to achieve the Spraytex application you desire. It’s a good idea to do a “test spray” away from your working area, so you can get an idea of the pressure you need to put on the nozzle or how far away from the surface you’ll need to be. A piece of cardboard of newspaper is a good place to rehearse. If the stream isn’t coming out evenly, hold the can under warm running water—not hot—for a minute or so to bring the temperature up, and try again. Spray in short bursts until you get a feel for how you need to spray to get the results you’re looking for.

For painting projects large and small, the key to achieving professional-looking results is all in the preparation. Patching, filling holes, retexturizing, sanding, removing hardware—this is all part of the job, and how well you do the prep work is as essential to your finished look as picking the right color paint. When it comes to paint and painting tools, you get what you pay for. The lowest-priced paint seems like a great bargain, but not after you’ve spent all weekend applying three coats because it won’t cover. Low-quality brushes, pads, and rollers can also cause a disappointing application. Make sure you use a face mask when sanding or working with harsh chemicals.

Spraytex is also a great solution for flaking, peeling, or bubbling paint. Use a paint scraper to rub away at the problem areas. Follow that with a fine-grit sandpaper until the problem area becomes flush with the rest of the wall. Wipe away any dust. If you have an indentation, it will most likely be visible once the wall is painted. If it’s a deep one, patch it with EZ-Patch Drywall Repair Patch or even it out with a bit of spackle. Use Spraytex Orangepeel, Knockdown, or Sand texture to match the newly repaired area with the existing texture. For best results, prime the area before painting or papering.